Do you like this
Parquet?

FIND OUT HOW TO BUY IT!

ASK FOR THE
NEAREST
DEALER

Download proposals and
technical material

DOWNLOAD
OUR CATALOQUE
AND TEXTURES


ita   eng   de   fr   es   ru   cn
Wood flooring Xilo1934
Wood flooring Xilo1934
Technical
information
Production Process

The decor is done directly on the raw surface and subsequently protected by a generous layer of lacquer. This makes the decor more resistant to wear and foot traffic.

Selections
classical
natural
REFERENCE STANDARDS

Xilo 1934 follows UNI-EN 13489:2004/free class, UNI-EN 13226:2004/free class and UNI-EN 13228:2004/ free class in the evaluation of its grades.

NON-VISIBLE CHARACTERISTICS

All characteristics are allowed without size or quantity limits, if these do not impair the strenght or the wearing quality of the wood floor.

VISIBLE SURFACE CHARACTERISTICS
CLASSIFICATION classical natural
Sapword Allowed small areas Allowed
Alive and closed knots Allowed All characteristics are allowed without size or quantity limits, if these do not impair the strenghth or the wearing quality of the parquet.
Rotten knots Allowed if repaired
Biological degradation Allowed
Splits Allowed max. 30 mm
Part of bark Not Allowed
Cracks Allowed if small
Tangled or diverted fiber Allowed
Good heart Allowed
Difference of colour (included red and black heart) Allowed
Stains and lath marks, if not visible Allowed
Maillé (Rays) Allowed
Biological degradation Not Allowed Not allowed, except black pin holes only
Structure and advantagesi

STABILITY; The three-layer floor has the intrinsic quality to increase the stability of the finished product, limiting its natural adjustments. Xilo1934 no longer produces its floors counterbalancing with the same wood, because it has found some deformation problems, therefore in order to obtain the maximum mechanical resistance, it has increased the internal part, reducing the counter­balancing to the minimum and adding a micro-bevel on the 4 sides. In this way, possible wood deformations are reduced in a remarkable way and the product is therefore

• suitable on heating floors

• suitable on cooling systems

Accessories

XILO1934 completes its offer with coordinated accessories that are suitable for stairway coverings or installation..

Squared profile
Round profile

Angular profile9 x 14 mm

Plywood & veneer - bird’s beak80 x 13 mm

Plywood & veneer – squared profile 40 x 15 mm

Solid wood75 x 13 / 95 x 10 mm

Synthetic / Stirpe idoneo per posa flottante con impianto
di riscaldamento tradizionale

Natural / Burlap idoneo per posa flottante con impianto
di riscaldamento a pavimento

Maintenance
I pavimenti XILO1934 trattati ad olio continuano a respirare poiché l’olio, essendo costituito solo da materiali naturali, è puro al 98% e penetra profondamente nel legno senza chiuderne i pori. Non si forma dunque uno strato addizionale e il legno mantiene la struttura e la tonalità naturale; in più acquista una elevata resistenza all’usura. I trattamenti ad olio, rispondono perfettamente alla norma DIN-68861, 1°, sono infatti idrofughi e resistono alla maggior parte dei liquidi usati a tavola, come ad esempio vino, birra, tè, cola, succhi di frutta, latte ed acqua. Sono inoltre in regola con le norme DIN 53160 ed EN 71, soddisfacendo così ai requisiti richiesti per i giocattoli per bambini. Questo tipo di trattamento richiede una certa cura nel tempo, per questo motivo è stato perfezionato un programma per la pulizia e la manutenzione che si compone di poche semplici istruzioni.
AFTER INSTALLATION
Oil finished floors are given a very resistant treatment in the factory and they are ready to be used immediately after installation. However, it is always a good idea to apply a coat of maintenance oil.. WEEKLY AND DAILY CLEANING
We suggest removing dust and dirt, sweeping or vacuum cleaning the floor. To clean the floor it is necessary to use a well-strung cloth, using the Maintenance Soap which has to be diluted with water (1/8 litre of soap in 5 litres of lukewarm water) or Oil Refresher. In this way, not only is the floor being cleaned, but a protective layer is also created, thus increasing the resistance of the surface and extending period of extraordinary maintenance.
ORDINARY MAINTENANCE

If the floor is particularly dirty, instead of using the soap, the Intensive Cleanser needs to be used (1/8 of Cleanser in 5 litre of lukewarm water). In this case, an application of maintenance oil is required.Particularly resistant stains can be removed with the Spot Remover, which must be sprayed on the stains and left there. If the wood has absorbed any dirt, a light sanding of the area is necessary, followed by an application of Maintenance Oil.

EXTRAORDINARY MAINTENANCE

If the floor has lost its original brillance, it should be treated with Maintenance Oil. Before oiling, the floor must be cleaned carefully with the Intensive cleaner diluited in water.
Spread the oil by hand or with the floor polisher immediately after applying it. Remove any excess oil with a dry cloth in order to avoid brighter areas. If necesssary, repeat until the floor appears saturated and with an opaque and silk-like surface. The floor can be used after about 4-5 hours (at about 18-20° C).
After 24 hours, Soap can be used to clean it.


AFTER INSTALLATION

No treatment is required after installation.

WEEKLY AND DAILY CLEANING

Remove dust and dirt by simply sweeping or vacuuming the floor. Clean the floor with a neutral soap or any other delicate products which have to be applied with a well strung cloth.
Use as little water as possible. If any water is spit on the floor wipe immediately.. inserire foto - Lacquer soap
- 1 lt. 40 sqm – once

ORDINARY MAINTENANCE

For ordinary maintenance you can use a wax or a lacquer care product suggested by the parquet producer to enliven, polish and preserve the floor.
. Wash the floor thoroughly with a neutral soap. Once completely dry, apply a thin coat of wax or protective treatment. If dirty, rinse the cloth/mop in clear water and wring it hard. Continue the application until finished, without stopping. Let the surface to dry for approx. 30 minutes. After 20-30 minutes, the floor can be walked on.
- Productive Lacquer Care - 1 lt. 60 sqm – once - Intensive cleaner – 1 lt, 70-80 sqm - 20 times - Protective Lacquer Spray - 1 lt. 40 sqm – once

EXTRAORDINARY MAINTENANCE

If the lacquer has worn out in some areas and the wood is uncovered, it is necessary to apply more specific products recommended by the company or published in our catalogues and/or website.

SUGGESTIONS

Place a wide rug at the entrance on the outside to avoid gravel and water from getting in. To prevent scratching, place small felt pads under chairs and tables. Protect areas which have to bear considerable weight with suitable rugs/mats.
Note: for maintenance operations, please see the instructions enclosed with the products used.

MAINTENANCE KIT FOR OILED FLOORS

3 pieces - 1 lt protective lacquer care, 1 lt soap, 1 lt cleaner + accessories, 60 sqm

OILED FLOORS
I pavimenti XILO1934 trattati ad olio continuano a respirare poiché l’olio, essendo costituito solo da materiali naturali, è puro al 98% e penetra profondamente nel legno senza chiuderne i pori. Non si forma dunque uno strato addizionale e il legno mantiene la struttura e la tonalità naturale; in più acquista una elevata resistenza all’usura. I trattamenti ad olio, rispondono perfettamente alla norma DIN-68861, 1°, sono infatti idrofughi e resistono alla maggior parte dei liquidi usati a tavola, come ad esempio vino, birra, tè, cola, succhi di frutta, latte ed acqua. Sono inoltre in regola con le norme DIN 53160 ed EN 71, soddisfacendo così ai requisiti richiesti per i giocattoli per bambini. Questo tipo di trattamento richiede una certa cura nel tempo, per questo motivo è stato perfezionato un programma per la pulizia e la manutenzione che si compone di poche semplici istruzioni.
AFTER INSTALLATION
Oil finished floors are given a very resistant treatment in the factory and they are ready to be used immediately after installation. However, it is always a good idea to apply a coat of maintenance oil.. WEEKLY AND DAILY CLEANING
We suggest removing dust and dirt, sweeping or vacuum cleaning the floor. To clean the floor it is necessary to use a well-strung cloth, using the Maintenance Soap which has to be diluted with water (1/8 litre of soap in 5 litres of lukewarm water) or Oil Refresher. In this way, not only is the floor being cleaned, but a protective layer is also created, thus increasing the resistance of the surface and extending period of extraordinary maintenance.
ORDINARY MAINTENANCE

If the floor is particularly dirty, instead of using the soap, the Intensive Cleanser needs to be used (1/8 of Cleanser in 5 litre of lukewarm water). In this case, an application of maintenance oil is required.Particularly resistant stains can be removed with the Spot Remover, which must be sprayed on the stains and left there. If the wood has absorbed any dirt, a light sanding of the area is necessary, followed by an application of Maintenance Oil.

EXTRAORDINARY MAINTENANCE

If the floor has lost its original brillance, it should be treated with Maintenance Oil. Before oiling, the floor must be cleaned carefully with the Intensive cleaner diluited in water.
Spread the oil by hand or with the floor polisher immediately after applying it. Remove any excess oil with a dry cloth in order to avoid brighter areas. If necesssary, repeat until the floor appears saturated and with an opaque and silk-like surface. The floor can be used after about 4-5 hours (at about 18-20° C).
After 24 hours, Soap can be used to clean it.

LACQUERED FLOORS

AFTER INSTALLATION

No treatment is required after installation.

WEEKLY AND DAILY CLEANING

Remove dust and dirt by simply sweeping or vacuuming the floor. Clean the floor with a neutral soap or any other delicate products which have to be applied with a well strung cloth.
Use as little water as possible. If any water is spit on the floor wipe immediately.. inserire foto - Lacquer soap
- 1 lt. 40 sqm – once

ORDINARY MAINTENANCE

For ordinary maintenance you can use a wax or a lacquer care product suggested by the parquet producer to enliven, polish and preserve the floor.
. Wash the floor thoroughly with a neutral soap. Once completely dry, apply a thin coat of wax or protective treatment. If dirty, rinse the cloth/mop in clear water and wring it hard. Continue the application until finished, without stopping. Let the surface to dry for approx. 30 minutes. After 20-30 minutes, the floor can be walked on.
- Productive Lacquer Care - 1 lt. 60 sqm – once - Intensive cleaner – 1 lt, 70-80 sqm - 20 times - Protective Lacquer Spray - 1 lt. 40 sqm – once

EXTRAORDINARY MAINTENANCE

If the lacquer has worn out in some areas and the wood is uncovered, it is necessary to apply more specific products recommended by the company or published in our catalogues and/or website.

SUGGESTIONS

Place a wide rug at the entrance on the outside to avoid gravel and water from getting in. To prevent scratching, place small felt pads under chairs and tables. Protect areas which have to bear considerable weight with suitable rugs/mats.
Note: for maintenance operations, please see the instructions enclosed with the products used.

MAINTENANCE KIT FOR OILED FLOORS

3 pieces - 1 lt protective lacquer care, 1 lt soap, 1 lt cleaner + accessories, 60 sqm

Certificates and guarantees

XILO1934 promises to provide special guarantees to its consumers and target market. This a way to emphasize further its commitment to making Made in Italy products which meet the rigorous technical and environmental EC requirements and ensures that its floors do not contain anything harmful free of formaldehydes. Such features are a clear sign of the very high-quality standard of its parquet floors.

Certification of forest management” means a verification procedure, which is recognized and tested, leading to the issue, by an independent body, of a certificate attesting that the forms of forest management meet certain requirements of “sustainability”. The PEFC forest certification scheme in Europe is based on three fundamental principles:
- The compliance with the criteria and indicators defined in the Ministerial Conferences for the protection of forests in Europe (Helsinki 1993, Lisbon 1998) who initiated the so-called “Pan-European process”;
- The application on a regional or group level (even if it is also possible to join individually);
- Periodical inspections and certification entrusted to an independent and accredited third party.
“Certification of forest management” means a verification procedure, which is recognized and tested, leading to the issue, by an independent body, of a certificate attesting that the forms of forest management meet certain requirements of “sustainability”. The PEFC forest certification scheme in Europe is based on three fundamental principles:
- The compliance with the criteria and indicators defined in the Ministerial Conferences for the protection of forests in Europe (Helsinki 1993, Lisbon 1998) who initiated the so-called “Pan-European process”;
- The application on a regional or group level (even if it is also possible to join individually); - Periodical inspections and certification entrusted to an independent and accredited third party. www.pefc.it

The FSC® trademark identifies products which contain wood from well managed forests according to strict environmental, social and economic standards. The forest of origin has been independently tested and evaluated according to these standards (principles and criteria of good forest management), established and approved by the Forest Stewardship Council® through the participation and consent of the parties concerned. www.fsc-italia.it

EN 14.342:2005+A1 MULTILAYER PARQUET MAXITAVOLE Q13 Informations on the performance related:
• Specific weight: Kg/m3 750
• Thickness: mm 13 (hardwood top layer 3.8 mm nominal)
• Reaction to fire performance: Class Dfl – s1
• Emission of formaldehyde: ZERO EMISSIONS
• Contain of pentaclorofenol: > 5 ppm
• Slipperiness: USRV 100
•Thermal resistance: 0,08 sqm K/W MULTILAYER PARQUET MAXITAVOLE Q13 Informations on the performance related:
• Specific weight: Kg/m3 750
• Thickness: mm 13 (hardwood top layer 3.8 mm nominal)
• Reaction to fire performance: Class Dfl – s1
• Emission of formaldehyde: ZERO EMISSIONS
• Contain of pentaclorofenol: > 5 ppm
• Slipperiness: USRV 100
• Thermal resistance: 0,08 sqm K/W
www.marcaturace.com

specifications

Prefinished parquet floor, entirely made in Italy, 3 layers with T&G locking or click system, thickness 13 mm with hardwood top layer of 3.8 mm in Slavonian Oak, Ash, Larch, Iroko, Doussiè, American Teak or Wenge. Spruce blockboard core, counterbalanced with Poplar or Spruce veneer. Micro-bevel on 4 sides and assembly of the layers with vinylic water-based glues with no added formaldehyde. Fixed or mixed widths of 100/120/150/175/200 mm and lengths from 1,200 mm to 2,500 mm, with approx. 20% lower than 1,200 mm. Slightly brushed surfaces and finish with natural oil and/or water-based transparent or coloured lacquer. Selection in Classice or Naturale choice, according to regulation UNI-EN 13489:2004/free class. Wood floor with no health risk emissions, particularly free of formaldehydes, finished only with VOC free products and complying with the EC regulations. Product suitable for floating or glued installation and for laying on heating floors or cooling systems. Reaction to fire performance: Class Dfl – s1.

PARQUET | Oak flooring MAXITAVOLE | Technical info oak flooring Maxitavole | Wood flooring MIX | Modern Luxury | Warm minimalist | Etnic Chic | Urban classic | Natural fusion | Country bohemien | Technical info wood flooring Mix | Decorative wooden flooring DESIGN | Archipetali | Esagona | Geometrico | Imprinting | Kimano | Lost and Found | Maps | Musciarabia | Nicchie | Paisley | Passi letterari | Ramoscelli | Rosae | Rosette | Sissi | Tappeti volanti | Tulipae andromeda | Tulipae gemini | Tulipae maior | Tulipae minor | Info tecniche Design | DECKING | Info tecniche Decking | XILOMOENIA | Info tecniche Xilomoenia | Kitchen parquet flooring | Bathroom parquet flooring


Like this Parquet?

ASK
FOR A FREE
ESTIMATE